Factory Reset by Pressing Keys on the IP Phones

Here we are going to talk about the way of factory resetting via the IP phones ,  including the VI2006 , VI2007 , VI2008 , C56 , C62 and IP40 . VI2006 : Menu –> Input the password ( The default is 123 ) –> up and down key –> SYSTEM –> Enter key –> up and down key –> SETDEFAULT –> Enter . VI2007 : Menu –> up and down key –> System Config –> Input the password ( the default is 123 ) –> More –> Enter –> up and down key –> Factory Reset . VI2008 : ok key –> Menu –> Input the password ( The default is 123 ) –> up and down key –> System Config –> up and down key –> Factory Reset . C56 : ok key –> Input the password ( The default is 123 ) –> up and down key –> SYSTEM –> Enter / ok key –> up and down key –> SETDEFAULT –> Enter . Since […]

Continue Reading Comments { 0 }

Feature Code of PBX210

This time , we are going to talk about the feature codes of PBX210 ,  which respectively are Call pickup , Call transfer and Call forward . Call transfer includes attended transfer and blind transfer . Call forward includes no-answer forward , busy forward and always forward .   1. Call pickup : When the call comes in , we can set the Hot Keys to make another extension to answer this call. When the extension […]

Continue Reading Comments { 0 }

Remotely connect to gateway through IP to IP

When you connect two gateways through IP to IP in the same network, they can work normally. if you hope to put them in the different networks, you need to do the below settings: 1. we need to open the sip and rtp port in the router. in the gateway, you can check the sip […]

Continue Reading Comments { 0 }

Convert the file format to GSM

When we upload sound files to PBX210/PBX220, we will find that only the GSM file can be uploaded successfully. So here we are gonging to talk about how to convert the mp3 file into GSM format, and how to amplify the GSM file’s volume to meet our requirement. Step 1: We use the software WavePad as an example.We can download it via this URL: http://s.voptech.com/firmware/wavepad/WPSetup.exe Step 2: Run the software, open the mp3 file that […]

Continue Reading Comments { 0 }

Caller ID of UCM

For the FXO of UCM, if you hope to make sure it can work normally, you can refer  to the below method: 1. we will do the ACIM detection firstly. 2. we will detect the PSTN line. if we just plug one PSTN line, we can choose semi-auto detect, and you can input your mobile […]

Continue Reading Comments { 0 }

MyPBX connects with FXS&FXO gateway

If you connect the MyPBX with FXS&FXO gateway in the same network, you can refer to the below file: Let us set the MyPBX firstly. 1. Please create one sip trunk. Here 192.168.1.195 is the IP address of gateway, and sip port is 5060, and we connect IPPBX with gateway through IP to IP. 2. […]

Continue Reading Comments { 0 }

Backup server of IP phone

When the IP phone registers to the sip server, if the main sip server is down, you can back up it to the other ip server. the setting is like this: 1. we will input the related information like this: Here the account and password of two sip server need to be same, and their server address and […]

Continue Reading Comments { 0 }

How to connect the card VC2400A

If you hope to connect the VC2400A to your sip server, here we assume you use VC2400A-24FXO, and sip server is elastix,  many points are very important: 1. before you plug the card,  you need to power off the sip server firstly,  after you plug the card, you can power on it;  2. the card has […]

Continue Reading Comments { 0 }

non-admin access to all the recordings

After you enable the recording in the extension, you hope the user you create can access all the recordings, but they cannot change any settings of elastix, you can refer to the below setting:  1. let us change some setting in the file index.php. You can ssh to elastix, and input the command: vi /var/www/html/modules/monitoring/index.php the steps are: (1). press […]

Continue Reading Comments { 0 }