Multi-site setting of IPPBX

Multi-site usually is used to connect VX and the other VOIP devices, such as another one VX, gateway or elastix. as usual, we just use these option: IP address, Prefix, Area code. Here we connect two VX as an example: VX1:192.168.1.192                                                             VX2: 192.168.1.218 About how to use the Area code, we assume that 12345678 is […]

Continue Reading Comments { 0 }

IP20 IP Phone with 2 SIP Lines Released

IP 20 is the latest enhanced business VoIP phone of VOPTech, based on SIP/IAX2 protocol. With sleek and elegant design, large high resolution graphic backlit LCD(128x48MM), RJ9 headset jacks, 2 SIP-line keys, 4 programmable keys with Led, 4 dynamic content-sensitive soft keys, a 5-position navigation key, including keys for voice mail, call transfer, call hold, […]

Continue Reading Comments { 0 }

IP to IP call between the IP phones

If there are just some IP phones in your office, you can also make them call each other without IPPBX. Next there are mainly two methods to realize it:           1. Dial the symbol of IP phone.           2. Dial the IP address of IP phone. Firstly, let us talk about the first method. For […]

Continue Reading Comments { 0 }

Asterisk connects with multiple GOIP

The environment of network is: Two goip is in the LAN of the office, and asterisk is in the public internet. The IP address of them: asterisk: v.voptech.com two goip: 192.168.1.194 and 192.168.1.195 Our purpose is: For the outbound calls: When the internal users dial 91+any number, the call will go out through sim card […]

Continue Reading Comments { 2 }

IP Phone IP40 with 4 SIP Lines Released

IP 40 is the latest enhanced business VoIP phone of VOPTech, based on SIP/IAX2 protocol.With sleek and elegant design, large high resolution graphic backlit LCD(128x48MM), RJ9 headset jacks, 4 SIP-line keys,8 programmable keys with Led, 4 dynamic content-sensitive soft keys, a 5-position navigation key, including keys for voice mail, call transfer,call hold, mute, volume control, […]

Continue Reading Comments { 0 }

VG1X Gateway FAQ

Q:How many FXO/S Ports are built in in This gatway. A:Our gateway could have up to 8 FXS/O Ports Q:Can I fax through an Your VG Gateway? A:Yes you can!Our VG Gateway could support T.38, which could make you fax on IP Networking. Q: Is your VG1X compatible with asterisk and related open source Platform? […]

Continue Reading Comments { 0 }

VI2008 FAQ

Q: Is your VI2008 have headset Interface A:Yes, VI2008 support RJ9 Headset interface. Q:Do VI2008 have speed Dial Key? A:Yes, VI2008 could have as more as 6 Speed Dial Keys. Q:Do VI2008 have Programmed Keys? A:Yes, VI2008 could have 3 Programmed Keys. Q: Is your VI2008 compatible with asterisk. A:Yes, our IP Phone VI2008 could […]

Continue Reading Comments { 0 }

VI2007 FAQ

Q: Is your VI2007 compatible with asterisk. A:Yes, our IP Phone VI2007 could work with opensource pbx software Asterisk, Free PBX, Elastix And Any other IP PBX based on Asterisk Q:VI2007 Support SIP and IAX2 A:Our VI2007 could support 2 SIP Accounts and 1 IAX2 Account! Q:Could VI2007 Support Broadsoft SIP Platform? Yes, we have […]

Continue Reading Comments { 0 }

Register FXO Gateway for ELASTIX

IMPORTANT This device has been tested for and Voice using firmware ” Rev 1.9.82.297″ versions available. ELASTIX Support shall require use of the above firmware to address support issues. Please note that you must factory reset the device before starting this procedure to reduce the possibilities of encountering difficulties. Note also that the device must […]

Continue Reading Comments { 0 }

VI2006 and VI2007 For How to select Line

With this peer of Phone number:9T / Destination: 0.0.0.1 / Port :5060 / Alias : del / Delete Length : 1 When IP Phone VI2006(192.168.1.201) pick up the phone dial number begin with 9, the call will be sent to SIP Line 1. For example, you press 9 + 186, the VI2006 will send 186 […]

Continue Reading Comments { 0 }