Archive | IP Phone RSS feed for this section

Upgrade V60 video phone with USB device

If you will upgrade the video phone V60 to the specific firmware, you can refer to the below steps: 1. Put the firmware to your USB device; 2. Plug the USB device to the video phone; 3. Press two keys at the same time when you power on the V60 IP phone 4. The phone will go to recovery mode, we can press up and down key to choose the second option: update from USB equipment, then click OK key. 5.Choose the firmware file and click OK button: 6.The phone will start […]

Continue Reading

Making Screensaver for IP Phone

Here we will modify the picture used for screensaver with the software PCtoLCD. Steps: Step 1: Modify the logo picture for the standby screen of IP Phones. The picture must be monochrome bitmap with the file name *.bmp. The size of logo depends on the IP Phones you choose. Here is the specific introduction: F62: […]

Continue Reading

Network Influence to the Quality of the VoIP Communication

Sometimes when we communicate on two different networks through voip devices such as IP phones, we may find that our speech probably is intermittent or we hear some acoustic echo. These make us feel a bad communication. That is because the quality of VoIP communication will be influenced by the network environment. We can test […]

Continue Reading Comments { 0 }

Call Park on UCM6104 and IP40

Here we are going to talk about the function of Call-park on IP phone IP40. Call Park can be used in such a situation, we are making a call but for some reasons we have to leave, and we don’t want to end it, so Call Park can work. In a word, Call Park means […]

Continue Reading Comments { 0 }

XML Remote Phonebook

If you hope the IP phone can get the phonebook remotely, you can refer to the method below: 1. Please create the xml file, and you can refer to the below content to input your own information: 2. Please put the xml file into the update folder of ftp server or http server, and make […]

Continue Reading Comments { 0 }

Factory Reset by Pressing Keys on the IP Phones

Here we are going to talk about the way of factory resetting via the IP phones ,  including the VI2006 , VI2007 , VI2008 , C56 , C62 and IP40 . VI2006 : Menu –> Input the password ( The default is 123 ) –> up and down key –> SYSTEM –> Enter key –> up and down key –> SETDEFAULT –> Enter . VI2007 : Menu –> up and down key –> System Config –> Input the password ( the default is 123 ) –> More –> Enter –> up and down key –> Factory Reset . VI2008 : ok key –> Menu –> Input the password ( The default is 123 ) –> up and down key –> System Config –> up and down key –> Factory Reset . C56 : ok key –> Input the password ( The default is 123 ) –> up and down key –> SYSTEM –> Enter / ok key –> up and down key –> SETDEFAULT –> Enter . Since […]

Continue Reading Comments { 0 }

Feature Code of PBX210

This time , we are going to talk about the feature codes of PBX210 ,  which respectively are Call pickup , Call transfer and Call forward . Call transfer includes attended transfer and blind transfer . Call forward includes no-answer forward , busy forward and always forward .   1. Call pickup : When the call comes in , we can set the Hot Keys to make another extension to answer this call. When the extension […]

Continue Reading Comments { 0 }

Backup server of IP phone

When the IP phone registers to the sip server, if the main sip server is down, you can back up it to the other ip server. the setting is like this: 1. we will input the related information like this: Here the account and password of two sip server need to be same, and their server address and […]

Continue Reading Comments { 0 }

Softphone for Android

If you are looking for one softphone which is installed in the Android, you can find it here: http://s.voptech.com/firmware/Android/3cx_sipphone.apk Here we assume the sip account is like this, and the softphone will remotely register to IPPBX: sip server address: 119.23.110.21 sip port: 6620 account: 8001 password: 12345678   The setting in the softphone will be: Name: […]

Continue Reading Comments { 0 }

DSS key of IP40

As usual, the DSS key can be used like this. Firstly, when the extension of IPPBX can receive multiple calls at the same time or when many people call the extension of IP40 at the same time, IP40 can pick up all of them, you can refer to the setting: Step 1: please put one sip […]

Continue Reading Comments { 0 }