Archive | Asterisk RSS feed for this section

Convert the file format to GSM

When we upload sound files to PBX210/PBX220, we will find that only the GSM file can be uploaded successfully. So here we are gonging to talk about how to convert the mp3 file into GSM format, and how to amplify the GSM file’s volume to meet our requirement. Step 1: We use the software WavePad as an example.We can download it via this URL: http://s.voptech.com/firmware/wavepad/WPSetup.exe Step 2: Run the software, open the mp3 file that […]

Continue Reading Comments { 0 }

PBX220 connects VX IPPBX in the same LAN

We assume that PBX220 and VX IPPBX are in the same network, and the related information is like this:   The function we will realize is like this: 1. the extension of VX IPPBX can call the extension of PBX220 each other; 2. when the extension of VX IPPBX dials the number 57+any number, the call […]

Continue Reading Comments { 0 }

Asterisk connects with GOIP by single server mode

If you connect asterisk with GOIP, and you want to realise it like this: when we dial 9+any number, the call will go out through any sim card of GOIP 1; When we dial 6+any number, the call will go out thrugh any sim card of GOIP 2. when we call in any sim card […]

Continue Reading Comments { 0 }

VI2006 registers to asterisk

If you are first time to use asterisk, and you hope that the VI2006 can register to asterisk, you can refer to the file. Here we assume sip server asterisk is on the public Internet, and the VI2006 is behind the router, and two tools can help us better finish the test: putty: http://s.voptech.com/putty.exe Winscp: […]

Continue Reading Comments { 0 }

Call transfer of asterisk

As ususal, we use blind transfer and attended transfer, and in asterisk, we also can do it. 1. please open the file features.conf, and change the related information you want, after we change it we need to input the command features reload in CLI to activate it. [general] atxfernoanswertimeout = 30     ; Timeout for answer on attended transfer […]

Continue Reading Comments { 0 }

Asterisk connects with FXO gateway

The network environment is: Asterisk connects to the public Internet directly;  Gateway is behind the router in the LAN. The purpose is: If all the extensions dial 0+any number, the call will go out through FXO 1 of gateway; If all the extensions dial 1-9+any number, the call will go out through FXO 2 of gateway. Any calls […]

Continue Reading Comments { 0 }

Asterisk connects with VX through multi-site

If you want to connect asterisk with VX, you can refer to this file. Here it is the related information(asterisk and VX are in the same LAN):   Below is our purpose: 1. 7XXX can call the extension 6XXX, and 7XXX can call out through the first dialing rule of VX. 2. 6XXX can call […]

Continue Reading Comments { 0 }

AX100 Voicemail and recording

If you call the extension of AX100, and it does not answer, you can leave a message to him, and he will check it, that is voicemail we will talk about. In the new version  5.5.3811.0 of AX100, we can realise voicemail and recording, and we have to plug the USB device, and all the […]

Continue Reading Comments { 0 }

asterisk follow me-when busy

Below is our purpose: When the extension 501 and 502 are in one call, at this time, 503 calls 501, because 501 is busy, we can make the other extension 504 ring. The setting of asterisk is as belows: In the sip .conf:   and in the extension.conf: Here 501,502,503 and 504 are all registered to our IP […]

Continue Reading Comments { 0 }